Wireless mac filtering – ALFA NETWORK AIP-W411 User Manual
Page 44

AIP-W411 150M Wireless 11N Router
- 38 -
Radius Server IP - Enter the IP address of the Radius server.
Radius Port - Enter the port number of the Radius server.
Radius Password - Enter the password for the Radius server.
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA-PSK/WPA2-PSK - It
’s the WPA/WPA2 authentication type based on pre-shared
passphrase.
Version
- you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select
WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption
- When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.
Note:
If you check the
WPA-PSK/WPA2-PSK
radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-21.
Figure 4-21
PSK Passphrase - You can enter a Passphrase between 8 and 63 characters.
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
4.6.3 Wireless MAC Filtering
Choose menu
“Wireless → MAC Filtering”, you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in Figure 4-22.