ALFA NETWORK AIP-W411 - Manual (Page 39)

AIP-W411 150M Wireless 11N Router
- 33 -
4.6.1 Wireless Settings
Choose menu “Wireless → Wireless Settings”, you can configure the basic settings for the
wireless network on this page.
Figure 4-16 Wireless Settings
 SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification)
must be assigned to all wireless devices in your network. Considering your wireless network
security, the default SSID is set to be AIP-W411. This value is case-sensitive. For example, TEST
is NOT the same as test.
 Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog