4x4-ud55a-vwd – Adaptive Technologies 4X4-UD55A-VWD User Manual

Page 6

4 Wide x 4 Deep Video Wall Display (Rear View)

4X4-UD55A-VWD

4 Wide x 4 Deep Video Wall Display Installation Guide

This display kit mounts Samsung UD55A LCD monitors
in a 4 wide by 4 deep landscape configurations. The
frame attaches to a wall and receives the LCD monitors
by way of four machined fittings (per monitor) that thread
into the monitor’s VESA holes. These fittings then insert
into the frame’s channels. The monitor’s fittings secure
to the frame with locking arms that provide an easy way
to remove the monitors for service. A removable panel
provides access for media players behind the frame.

Important: Installing video displays is a serious
endeavor that requires experienced professionals.

Improperly prepared walls and other structures as

well as the equipment being installed can result in

property damage, injury, death and/or liability to the
installing contractor. Do not proceed if any part of the
installation is in doubt.

Caution: Due to the wide variety of structures,
environments, materials and installation methods, the
installing contractor must exercise good judgment in
selecting the proper mounting area. The mounting
structure must be capable of supporting at least 5 times
the load of the installed equipment. Consult local
building codes for further guidance.

Follow these instructions for the most efficient and

safest mounting results.

Package Contents:
1 pc

Upper Frame Assembly w/ locking arms

1 pc

Lower Frame Assembly w/ locking arms

7 pcs Vertical Joiner bracket

64 pcs Adjustable VESA button (black)
42 pcs Adjustable Lag bolts, 5/16”
42 pcs Hex nuts, 5/16”
42 pcs Flat washer, 5/16
1 pc

Instruction sheet

Notes:
Hardware to mount frames to wall is included.