Steffes Transmitter User Manual
Transmitter, Off-peak system control, Warranty

WARRANTY
Steffes Corporation (“Steffes”) warrants that the Steffes Power Line
Carrier Transmitter is free from defects in materials and workmanship
under normal use and service. Steffes’ obligation under this Warranty is
limited to the repair or replacement of the appliance or parts only which
prove to be defective under normal use within one (1) year of the date of
installation and which Steffes’ examination of the returned device or
part(s) shall verify to Steffes’ satisfaction that it is defective. The user
shall be responsible for any labor costs associated with the repair or
replacement of the device or part(s) including the cost of returning the
defective appliance or part(s) to Steffes Corporation.
This Warranty is void if the transmitter device is moved from the
premises in which it was originally installed. This Warranty shall not
apply to a device or part which has been altered in any respect, or
improperly installed, serviced or used, or has been subject to accident,
negligence, abuse or misuse.
THE ABOVE WARRANTY BY STEFFES IS EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN
OR ORAL, EXPRESSED OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR OF
FITNESS FOR A PARTICULAR PURPOSE.
The user assumes all risk and liability whatsoever resulting from the use
of this transmitter. In no event shall Steffes be liable for any indirect,
special or consequential damages or lost profits.
This Limited Warranty contains the complete and exclusive statement of
Steffes’ obligations with respect to the transmitter and any parts thereof.
The provisions hereof may not be modified in any respect except in
writing signed by a duly authorized officer of Steffes.
3050 N Highway 22
Dickinson, ND 58601-9413
701-483-5400
“Commitment to Innovation”
Operation & Installation Guide
for
Power Line Carrier
Transmitter
(Applicable to Software Version 14.0-14.9)
“Manufactured in North America”
Off-Peak System Control
“Commitment to Innovation”
PLC8
DOCUMENT #1200114