OEM Controls CANBus Product Line User Manual
Page 8

OM-17288
CANBus USERS MANUAL
Page 8 of 38
Revision C
GJO*07-12-06
ORIGINAL
Electrical Installation
4.1 Connector Layout ( All Modules )
4.1.1 Connector
Information
( Deutsch Part Numbers )
Connector “A” mates with
- Deutsch DT06-12SA ( Grey )
- W12S Wedge ( 1 pc )
- 0462-209-16141 Sockets ( up to 12 pieces )
- 114017 Seal Plug ( for unused connections )
Connector “B” mates with
- Deutsch DT06-12SB ( Black )
- W12S Wedge ( 1 pc )
- 0462-209-16141 Sockets ( up to 12 pieces )
- 114017 Seal Plug ( for unused connections )
4.2 Power Supply
4.2.1 Typical Supply Voltage : 8-32 VDC
4.2.2 Protection: The OCI Modules are protected for the following adverse conditions
and can withstand these conditions without any permanent damage to the
module.
4.2.2.1
Reverse polarity: The VBat and Ground terminals can be swapped
without the possibility of permanent module damage.
4.2.2.2
Short Circuit: Any Input or Output from the Module can be shorted to
VBat or Ground without the possibility of permanent module damage.
4.2.2.3
Over voltage: The module is able to withstand Transient Voltage
levels per IEC specification 61000-4-5:1995