Panasonic CF-48 Series - Manual (Page 15)

Log on to Windows
After confirming that the hard disk drive indicator (( I) has turned off, input the user
name and password, then select [OK]. Until the correct user name and password are
entered, the computer will not operate.
msmuM
After confirming that the hard disk drive indicator (P) has turned off, select the user
and input the password, then select
computer will not operate.
Until the correct password is entered, the
Select your application
You are able to start working on your computer.
X note >
The power saving function is factory set, so if there is no input from a key, the touch pad or
an external mouse (when one is connected) for a certain interval of time, the power to the
LCD and hard disk may be turned off. The LCD will resume operation when the touch pad
or an external mouse (when one is connected) is used or a key is pressed.
The power to the LCD may be turned off even when an application software is being
installed. In this case, because it is conceivable that a selection dialog box will be shown,
do not press C Space ) orC Enter ) to attempt to resume from this condition as doing so
may trigger a selection, but instead, press a key unrelated to the direct triggering of a
selection, like (
Ctrl).
In addition, when the computer is left alone, it automatically enters the standby or hiberna­
tion mode (O’ “Standby/Hibemation Functions”), The computer will resume by
pressing the power switch.
When switching to a different user with the Fast User Switching function, it may not be
possible to set the settings of the display. In this case, log on with the administrator author­
ity again, not using the Fast User Switching function, and try the operation once more.
15