First-time operation, Connect your computer to a power outlet, Open the display – Panasonic CF-48 Series User Manual
Page 10: Turn your computer on
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/654215/10/background.png)
First-time Operation
DC-IN Jack
—1
DC IN 15.6V
Connect your computer to a power outlet
The battery pack will be charged automatically.
Charging Time: Approx. 3 hours
(Varies depending on the usage conditions.)
^--------------------------------------------------------------------------------------
•
Be sure the AC adaptor is connected until completing Step 7 on page 11.
•
When using the computer for the first time, do not connect any peripheml device
except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
•
Do not twist or pull the AC power cord forcefully. Doing so may damage the
connections.
•
Use only the specified AC adaptor with your computer. Using an AC adaptor other
than the one supplied might dam^e the battery and/or the computer.
•
When the DC plug is not connected to the computer, disconnect the AC cord from
your AC wall outlet.
•
Problems such as sudden voltage drops may arise during periods of thunder and
lightning.
Since
this
could
adversely
affect
your
computet;
mt
uninterruptible
power
source (UPS) is highly recommended unless running from the battery pack alone.
Open the display
® Slide the latch located at the front.
Lift open the display.
Turn your computer on
Press the power switch and hold it for approximately one second until the power indicator
turns on before releasing it.
•
• Do not press the power switch and hold it for more than four seconds; this will
cause the power to be turned off forcibly.
• Do not press the power switch repeatedly.
• Once the computer is powered off, you must wait at least ten seconds before pow
ering it on again.
10