Hold switch, M if the lens is dirty, If discs are dirty – Panasonic SL-XP300 User Manual
Page 14: If the cabinet is dirty, Maintenance, Remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control
(continued)
•When pressing the button twice or three limes in succession, press it within one second and
at equai intervals.
•Volume can be controlled within the main levels of the unit. Make sure to adjust the phones
level control of the unit to 5-7 position.
•The Operation Indicator lights during playing and flashes in the stop mode. (The indicator is
turned off in a power off condition.)
Hold switch
If setting the hold state by sliding down the Hold switch, the Remote control button can not be
pressed. This prevents the Remote control button is pressed by mistake.
Maintenance
(Be sure to switch operation “OFF" first. If
you are using the AC adaptor, disconnect it
before cleaning.)
m If the lens is dirty...
A dirty lens will cause sound skipping and,
if the lens is very dirty, disc play may not be
possible. Open the disc holder and clean
the lens as shown in the figure.
Cleaning kit (option)
Part number: SZZP1038C
»For dust on
the lens
Air blower for
camera lens
Lens
• Use a cotton swab
to clean away
fingerprints, etc.
on the lens.
■ If discs are dirty...
Clean with a soft, damp cloth, and wipe dry,
Always from the
center outward.
Scratches caused by
wiping in this direction
can create noise.
■ If the cabinet is dirty...
Wipe with a soft cloth. If the cabinet is very
dirty, dampen the cloth with a weak solu
tion of neutral detergent and water, and
then wipe clean.
-14-