Panasonic SL-XP300 - Manual (Page 10)

Operation
(continued)
m Resume play
(To play a disc from the track last played)
Before use, release the hold state of the unit
1. Set the Play Mode Selector to “RE­
SUME” in the stop mode.
RESUME
k
JO*CO
9 9 U I - U I U
Resume Indicator
2. Press the Play/Pause Button.
3. Press the Stop/Operation Off Button to
stop disc play (for example, while the
track 5 is being played.)
4. Press the Stop/Operation Off Button
again to turn the unit off.
5. Press the Play/Pause Button.
•The disc will be played from the begin­
ning-of the track 5.
RESUME
b
f"i • m
u -u
I
Repeat Indicator
•Automatic Repeat Function
When the unit is in the resume mode, the
unit will be automatically in the repeat
mode.
•To cancel the repeat mode, press the
Repeat Button or press the Stop/
Operation Off Button.
Notes:
• The disc may be played from the next track
when disc play has been stopped near the
end of the track.
• Changing a disc confuses the resume play
operation.
• Resume play cannot be performed when
using the disc contained only one program.
• Program memory can not be resumed. If
the unit has been turned off during program
play, the track being played will resume
only.
•Resume play mode can be set during play
without turning off the unit.
[4] Random play (To play a disc in random order)
The unit’s microcomputer selects the sequence of play in random order until all of the tracks
on the disc have been played.
Before use, release the hold state of the unit,
•The first Track Number can be se­
lected by pressing the Button in 1. Set the Play Mode Selector “RANDOM”
in the stop mode.
RANDOM
n uo co
Random Indicator
2, Press the Play/Pause Button.
•The disc will be played in the random
order.
the stop mode.
►When all tracks have been played in
random order, the disc will automati­
cally stop.
Note:
Program play cannot be performed in the ran­
dom mode.
-10-