Calibrate the touchscreen, Twind^2000l, Twindo^xri – Panasonic CF-18 User Manual

Page 12: Windoi^xri, Create a new account, Eaiijiiion, First-time operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

First-time Operation

note

If “Yes, make this computer a member of the following domain” is selected,

the following message may be displayed: [An invalid domain was specified.

Would you like to proceed for now and try joining a domain later?]. In this

case, select [Yes]. After selecting [Yes], the computer will restart automati
cally, but sometimes the [Starting Windows] message will remain on the screen,
and windows will not start up. If this happens, hold (ТаЮ down while
pressing

СШ)

until [Network Identification Wizard] is displayed on top, and

follow the instructions on the screen.

@ Enter your administrator password and select;

If [Windows XP is currently configured to manage the Intel(R) PRO/Wircless

LAN adaptor.] is displayed, select [Yes].

Calibrate the touchscreen.

tWind^2000l

(T) Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration].

@ Touch the “+” mark on the calibration screen with the stylus (included) for about one second.

After the calibration procedure is executed (c.g., after the nine “+” marks arc
touched), the procedure ends when C Enter:) is pressed.

tWindo^XRi

[TouchScreen] - [Calibration].

Touch the “+” mark on the calibration screen with the stylus (included) for about one second.
After the calibration procedure is executed (e.g., after the nine “+” marks arc
touched), the procedure ends when (Enter) is pressed.

(Windoi^XRi

Create a new account.

© Select [Start] - [Control Panel] - [User Accounts] - [Create a new account].
© Enter a name for the new account, then select [Next],
© Select [Computer administrator], then select [Create Account],
©

Select the new account you have created and select [Create a password].

Follow the instructions on the screen to create a password.

eAiijiiiON

Remember this password! If the passw'ord is forgotten, Windows cannot be operated.
You can create a password reset disk beforehand ((^^ page 14).