Single monitor connection, Multiple monitor connection, System connections – Panasonic WV-BM1410 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1. Single Monitor Connection

SYSTEM CONNECTIONS

WV-BM1410

TV Camera

|-V10EO-|

OVT^IN

1
l" ■

Coax.

Connect the Video Input Connector (VIDEO IN) on this

monitor to the Video Output Connector of the video

source with a coaxial cable.

Set the Video Termination Switch to the 75 position.

Connect the Video Input Connector (VIDEO IN) on this

monitor to the Video Output Connector of the video

source with a coaxial cable.

Connect the Video Output Connector (VIDEO OUT) on

this monitor to the Video Input Connector (VIDEO IN)

on the second monitor with a coaxial cable.

Complete the connections of all monitors in the system

according to the above procedure.

Set the Video Termination Switch to the 75 ii position

on the last monitor and to the HiZ position on the other

monitors.

2. Multiple Monitor Connection

Video Switcher

Last Video Monitor