Panasonic WV-BM1410 - Manual (Page 4)

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
1, Power On/Off Switch (POWER ON/OFF)
This switch turns the power of the monitor on and off.
Press this switch once to turn (switch down jw.) the
power of the monitor on.
Press again (switch up J.) for turn the power of the
monitor off.
5. Vertical Hold Control (V, HOLD)
This control is used to lock the vertical position of the
picture.
6. Height Control (HEIGHT)
This control is used to adjust the height of the picture.
2. Power Indicator
This indicator lights to indicate that the power is on.
3. Scan Size Selection Switch (SCAN SIZE, UNDER/
NORMAL)
This switch is used for selecting the scan size.
Press once (switch down *) to select the Under Scan
mode.
Press again (switch up i) to select the Normal Scan
mode.
4. Horizontal Hold Control (H. HOLD)
This control is used to lock the horizontal position of
the picture.
7. Bright Control (BRIGHT)
Turn this control clockwise to increase the picture
brightness.
Turn this control counterclockwise to decrease the
picture brightness.
8. Vertical Linearity Control (V. LIN)
This control is used to correct the vertical nonlineari­
ties in the picture.
9. Contrast Control (CONTRAST)
Turn this control clockwise to increase the picture con­
trast.
Turn this control counterclockwise to decrease the
picture contrast.
-
2
-