Programming the home theater remote, Code unknown, Code known – Panasonic CT-31SF14 User Manual

Page 29: Infrared remote codes for specific components

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programming the Home Theater Remote

The remote control can be set to control other manufacturers components, by utilizing the

MODE SELECTION

BUTTONS

for

CABLE, DSS, VCR, RCVR

Receiver

Amplifier), CD, LD,

and

AUX

(for

Cassette Players, Second

VCR

or a

DVD.)

Code Known

Use the following procedure for setting up the

remote control using the numerical buttons

when the component’s remote code is known.

m Determine the brand of the component.

[21 Identify the code(s) associated with the

brand from the infrared code index (see
following pages). Record all possible
codes.

Confirm that the component is plugged
in and operating properly, then turn it

OFF.

Rl Press and hold theif^ button, then

the

button so that both are

pressed at the same time for atle^sM

Then let go of the buttons.

^ Press the appropriate Mode button

for the component.

^ Enter the 3-digit code, by using the

Remote Control Keypad “0”

through ”9” buttons.

iNow the remote is set for the!
¡enteredicode.

ft nwi Wl

[

]

Code From

Index Sheet

m Press the button to test the remote. If

the correct code is setup for the
component (in step [Kl), the component
will turn on.

Code Unknown

Use the following procedure for setting up the

remote control when the component’s remote
access code is not known. This procedure

uses the ’’sequence method”.

Confirm that the component is plugged
in and operating properly, then turn it

OFF.

[Hi Press and hold the

button,

then the button so that both

are pressed at the same time for at

leasrs^secpnds. Then let go of the

buttons.

IHI Press the appropriate Mode button

for the device.

^ Press the button to step

over to the next code.

Press the

button to test the

remote. If the correct code is

sent, the component will turn on.

EUR511052

Once the correct code is found,

press the

button

to store the code.

Repeat from step El above until the

proper component code is found. It

may take several attempts before

the correct code is found.

Note:

Some brands have multiple codes.

Repeat the procedure using another
listed code until the component
responds correctly.

Note:

If an incorrect code is entered, or

when

the

operation

not

completed within 30 seconds, the

settings will not change.

Infrared Remote Codes for Specific Components

Helpful Hint:

Write down the code numbers for your components in the space provided below. This

will serve as a handy reference whenever you need to reprogram your remote control.

CABLE

Cable TV Converter Box

VCR

Videocassette Recorder

CD 1

Compact Disc Player

____

DSS

Digital Satellite System

RCVR

Receiver or Amplifier

Laser Disc Player

Ottisr Component

Other Component

other Component

1 Other Component

II Other Component

- 2 9 -