Panasonic CT-31SF14 - Manual (Page 16)

Audio Adjustments
Audio Norm
This feature is used to reset BASS, TREBLE, and
BALANCE back to a factory preset level.
NOTE: Bass and Treble are automatically set when Al
Sound is ON.
1. Press
2. Press or^^ and or to highlight the Audio
Icon.
3. Press to display the Audio Adjustment Menu.
AUDIO NORM
---- up
4. Press ^ or^ to highlight AUDIO NORM.
5. Press
Treble, and Balance.
6. Press (^3) twice to exit menus.
Bass, Treble, and Balance
Before setting Bass or Treble select the desired mode of
Al Sound {ON or OFF). Bass and Treble Adjustments may
require readjustment when changing between Al Sound
ON or OFF.
1. Press
^ or^ and or to highlight the Audio 2. Press or
Icon.
3. Press to display the Audio Adjustment Menu.
BALANCE.
5. Press or ^ to adjust for desired audio response.
6. Press (^3 twice to exit menus.
Heipful Hints:
BASS - To increase or decrease the Bass response.
TREBLE - To increase or decrease the Treble response.
BALANCE - To emphasize the LEFT/RIGHT speaker
volume.
Mode (Stereo/SAP/Mono)
When Audio is broadcast in Stereo or SAP, an On-Screen
display will appear on initial ‘Turn On” and “Channel
Change". The available choices will be indicated in red.
1. Press
2. Press or^^ and or ^ to highlight the Audio
Icon.
3. Press to display the Audio Adjustment Menu.
IBI" STEREO BEniil2IIaEEl
4. Press ^ or^ to highlight MODE.
5. Press or ^ to select STEREO, SAP (Second
Audio Programming), or MONO. The selected mode
will be highlighted.
6. Press (^3 twice to exit menus.
Helpful Hints:
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (such as bilingual
audio, weather reports, etc.).
MONO - Use when stereo signal is weak.
-
16
-