Panasonic PV-C1321A - Manual (Page 30)

Special VCR Features (continued)
Weak Signal Display ON/OFF
When “ON” is selected, picture is displayed even when a
broadcast signal is weak or nonexistent.
1
ACTION
Display MAIN MENU.
Press ACTION.
2 Display SET UP CH
screen.
1) Press AWM ►
to select “CH.”
2) Press ACTION
to display.
3
SET UP CHANNEL
CABLE ANTENNA
AUTO SET
^ ANNEL CAPTION
SELECT:* ▼ KEY
SET :► KEY
END
: ACT I ON KEY
Select WEAK SIGNAL
DISPLAY.
1) Press AT to
select.
2) Press ► to
set “ON” or
“OFF.”
“ON” = Picture is displayed regardless of signal condition, and
may not always be clearly visible.
“OFP = Screen turns solid blue when signal is absent or weak.
If unit is connected to equipment which has blue back feature,
selecting "ON" will have no effect on the other equipment.
rww MU ■ JJf
© O O O
C 5 o © 0 |
awAOOTCK _ S
O O © © '
tOUMlUl
iO O © ©
lyvE AmiT
O ® © Q
2
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
^ :VOL DOWN
4
ACTION
Return to the normal
screen.
Press ACTION twice.
VCR Lock
All operations are prohibited except Tinner recording and tape
eject. Useful for families with small children.
VCR LOCK ACTIVATED
VCR LOCK OFF
To turn “ON.”
In stop mode, hold
down REC on the
unit without a
cassette inserted for
7 seconds.
To turn “OFF.”
Repeat above with
or without cassette.
• VCR Lock is canceled automatically
after about 24 hours if clock is set.
30
For assistance, please call: 1-800-211-PANA(7262) or send e-mail to; [email protected]