Panasonic PV-C1321A - Manual (Page 16)

TV Timer Features
ON-TIWIER with Alarm
This unit can be set to automatically power on in one of 3 modes {TV,
Playback, or FM Radio.) You can also combine the On-Timer with a one
minute alarm that gradually increases in volume.
Display SET PROGRAM
screen.
Press PROG.
2
SET PROGRAM
TIMER PROGRAMMING
SELECT
SET
END
* r KEY
► KEY
PROG KEY
Select ON-TIMER.
1) Press AT
to select.
2) Press ► to
display.
3
Xl/Or<|r^MER
SELECT HOUR
SELECT:* ▼ KEY
SET > KEY
E№ :PnOG KEY
ON-TIMER mode selection order
^CH02—CH03........ CH125-
CHOI
U f M9—FM8-
Set the ON-TIMER TIME.
1) Press AT to
select.
2) Press ► to set.
• Make sure a tape is
inserted if Playback
mode is selected.
• See “FM Radio" bn
pages 20 and 21 for
instructions on how
to preset FM stations.
■FM1
4
ON TIMER
ALAFMrON ABC
SELECT ALARM
CANCEL
SELECT
SET
END
ADO/DLT KEY
* ▼ KEY
■ * ► KEY
PROG 1®^
Set Alarm.
Press AT to select
“ON” or “OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one minute or until
canceled by pressing any button (including VOL -f -.)
To Make Corrections,
use AT and ◄ ► to move back and correct as necessary.
Set ON TIMER.
Press PROG.
• “ on timer set ” is displayed.
• ON TIMER indicator lights on the unit.
iN^Check list before you begin.
□ The clock is set to correct time.
ON TIMER indicator
©ooo
_SOOO|
o o ©
cowrm
6 0 0 0 ®
R-TWC ADODLT )
OOCDOit
ADD/DLT
OSELECT/SET
• A:CH up
:CH DOWN
• ► :VOL UP
4-^:V0L down
To cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to clear the time in
step 3. Now, press PROG to end. “ON TIMER END” appears
on-screen for a few seconds.
16
If no button on the remote or unit (including
a button used to turn off the alarm) is
pressed within 60 minutes after unit turns
itself on, it will turn itself back off.
For assistance, please call: 1-800-211-PANA{7262) or send e-mail to: [email protected]