Other play methods, Anti-shock function – Panasonic SL-SX221C User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Other Play Methods

The letters such as O in the illustrations refer to the descriptions in the “Location of Controls” section. (See page 2.)

Skip play

The disc plays from the specified track through to the
last track, then play stops automatically.
Preparation: Put unit in stop mode. (See page 3.)

RAtJDOM

llRESUME

Q O l l O D I

Select the desired track.

Program play

Up to 24 tracks can be entered in the program.
Preparation: Put unit in stop mode. (See page 3.)

RANDOM

NCBI llRESUME

I 0 0 I I 0 0 I 1

Select the desired track.

Register

sequence.

(The indication "M" and the programmed sequence
appear on the display.)

MEMOflY/RECALL

Repeat steps 2 and 3 to program all the

desired tracks.

Anti-Shock Function

A.SHOCtr

The lollowing indicator appears on the display.

r i r n

A.SH0CK

U ' J U

If “

" is dispiayed

No more tracks can be programmed.
To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
To delete the entire program
Press [■, OPR OFF],

Random play

HORlIlHEaUME

I I O O I I O O I I

Release

For your reference:

•It is also possible to press

while the unit is in

stop mode to change the first track to be played, (All

tracks are played eventually, regardless of which is

played first.)

•Program play is not possible in the random mode.

Resume play

This function allows you to listen from the beginning of
the track where play stopped because the unit was
powered off (or switched to stop mode). It is useful
when listening to CDs in the car, etc.

RANDOM

[ I o o l l o o I

Release

To program the same track In the sequence more
than once
After step 3, press [MEMORY/RECALL] desired

number of times.

For your reference:

• If [NOR, RANDOM, RESUME] is pul in the [RESUME]

position, the all-track repeat function will be activated

automatically as soon as the unit is powered on.

•If power is cut off near the end of a track (off mode),

playback may resume from the beginning of the next
track,

• If the unit is powered off while a disc was playing and

then a new disc is inserted, play will begin from the

middle of the new disc because the unit remembers

the position where play stopped on the previous disc.

Anti shock works by reading audio data and storing it in

memory. The unit then fills in interruptions caused by
bumps and vibrations with data from the memory.

[ SL-SX270~1

1 up to 40 seconds worth

I ^,4500^1

: up to 10 seconds worth

This unit also incorporates a powerful anti-shock mech

anism that prevents skipping caused when play speed
is changed by swinging of the unit.

Press during play or stop mode.

To cancel the anti-shock function

Press [A.SHOCK] again.

Repeat function

Press during play or stop mode.

The setting is switched in the sequence indicated below
each time [

1 is pressed.

1 -track repeat (1

)<—

One track is repeated.

Atl-track repeat (ALL
All the tracks on the
disc are repeated.

Cancel (no indicator is shown)

For your reference:

If [ CD ] is pressed during program play, only the tracks

in the program are repeated.
(The indication “ALL" is not displayed.)

Changing the sound quality

Press during play or stop mode.

The setting switches in the sequence indicated below
each time [EO] is pressed.

S-XBS-

t__

^TnAIN-^Canoel (гю indicator is shown)

S-XBS;

Select this setting to boost the low-range response.

TRAIN;

Select this setting to avoid annoying other passengers
with noise from your earphones while riding on the train,
or to reduce fatigue when listening for a long period of

time.

If you have pressed [A.SHOCK] when the unit is in stop
mode, press [^11] to start play.

When bumps continue repeatedly

The message "SORRY” appears on the display and

sound is interrupted.

•The anti-shock setting can be changed during play,

but this may cause a slight interruption in the sound
because the disc's rotation speed changes.

•During anti-shock operation, the disc rotates at a high

er rale than usual to collect extra audio data. This
could result in a slight increase in disc rotation noise.

Listening to sound with the unit con

nected to an audio system

The anti-shock function uses digital signal compression
technology. It is recommended that the anti-shock func
tion be canceled if the unit is connected to a home
audio system.

RQT5363