To operate on ac power, To operate on battery power, Cdcd – Panasonic RX-DT600 User Manual
Page 4: Ij 7 k 8 k 6, Battery installation, Battery removal, Battery life
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
....
:
: •> '
To operate on AC power
Connect the included AC power cord to the AC socket of the unit and
your household AC outlet.
To operate on battery power
Battery installation
Unplug the AC power cord from the household AC outlet and the AC
socket of the unit.
Insert eight R20/LR20 (UM-1, not included) batteries into the battery
compartment, making sure that the batteries are installed in the
designated numerical order and that the proper polarities are main
tained.
jffYtil
4
m
k
—d
Outer row @
ij 7 K 8 K 6
) ©
©CDCD® ©
Inner row
©
©
•Batteries installed with incorrect polarities may leak and damage
this unit,
•Do not mix batteries (old and new) or types (manganese and
alkaline, etc.).
• If the unit is not used for a long period of time or is used only from
an AC power source, remove the batteries to prevent potential
damage from possible battery leakage.
Battery removal
Remove as shown in the figure below.
Battery life
When the OPERATION/BATT indicator goes off (or dims) during
play, replace all the batteries with new ones.
OPERATION^ATT
O