Panasonic RX-DT600 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

When the Deck 1 pause and record buttons are pressed, tape editing starts by pressing tne QecK

playback button.

■/A

STOHEJECT

l/A

SronEJECT

■/ft

8T0WEJECT

EDrnNOn.P

MOH* *11

PAUSE

Set SELECTOR to “TAPE/

Press Deck 1 STOP/EJECT

and load the tape to be re
corded.

Load the tape with the side to be re
corded facing you.

Press Deck 2 STOP/EJECT
and load the tape to be played
back.

Load the tape with the side to be piayed

facing you.

Select the editing speed by
setting EDITING/B.P.

HIGH: High speed
NOR: Normal speed

Press Deck 1 PAUSE, then
press IRECI •

PLAY

Press the Deck 2 PLAY.

Editing is started by means of the synchro-start function.
Do not set the “CD" or “RADIO” function selector during editing.

Do not change the editing seiector during editing. The piayback
sound may fiutter.
Some TV sets generate noise that could be recorded during editing.
To prevent the possibiiity of this, do not use this unit closer than

1.5 m to a TV set.
Recording is not affected by changes made to the volume or tone
quality during the recording.

To stop the editing:

■/ft

STO№IECT

Press the Deck 1 and Deck 2
STOP/EJECT.

For your reference:

Recording is not affected by changes made to the volume or tone

quality during the recording.