Panasonic SL-PD1010 - Manual (Page 12)

i^O^eunplity
Using the remote control
transmitter
To confirm the programmed contents
RECALL Press RECALL.
Each time you press RECALL, the display
shows the programmed disc and track number
in the sequence you have entered.
3,-
( * . J DISC
PGM
/ 1
Uimf, No.
1
Programmed Programmed
track order
To clear a single item of the programmed
contents
CLEAR Press CLEAR.
Each time you press CLEAR, you will cancel
last entry in the order you have entered.
To clear an entry in the middle of the program
sequence, press RECALL repeatedly until the
display shows the selection to be cleared, and
then press CLEAR within three seconds after
the last press.
All of the tracks will be played one time each in random order.
There are two types of random play as described below.
RANDOM
MODE
One disc random play
The changer will play all tracks on the current disc In a random
order. Then it will choose a new disc randomly, excluding the
discs already played, and play all tracks on that disc In a random
order.
[In the stop or play mode]
Press RANDOM MODE so that the
“1 DISC RND” indicator illumi­
nates.
Each time the button is pressed, the display
will change in the following order: 1 DISC RND
— FULL RND ^ (off).
RANDOM
MODE
---------- ^-----------------------
< /> / /
m
/ /1 ■ 1
/ U-U 1
MM SEC
SC RND
Ilium
____1
nates
Full random play
Each track to be played back Is selected randomly from all of the
tracks on all of the discs, excluding the tracks that have already
been played.
RANDOM
MODE
[In the stop or play mode]
Press RANDOM MODE so that the
“FULL RND” indicator illuminates.
Each time the button is pressed, the display
will change in the following order: 1 DISC RND
— FULL RND - (off).
Illuminates
The changer will stop automatically when all the tracks on all
discs have been played once.
To cancel random play mode
Press ■.
The “1 DISC (or FULL) RND" indicator will go
out.
12