Panasonic SL70 - Manual (Page 15)

Operation
< Onscreen Display> < Function and Operation>
M onitor Self Test
See figure A.
No S i g n a
f H —.—kHz
fV —Hz
See figure B.
E r r o r
fH 74.9kHz
fV 60.0 Hz
This display indicates that the monitor is
operating normally. When one of the following
conditions occurs, press one of the 4 front
panel keys to call the appropriate display.
1) No Signal (The computer is not connected or
the mains power to the computer is
disconnected). See figure A.
2) The horizontal or vertical sync, signal are
outside of the permitted range (the value of
the horizontal sync, signal will be displayed in
red and the value of the vertical sync, signal
will be displayed in white). See figure B.
M enu
The adjusted items are represented by
icons.
When the Q] key is pressed, the menu
screen appears.
Use the 3 • B keys to move the cursor
to the item to be adjusted, then press
the [U key to call the adjust menu.
E 3 -Xi- E a
O SI
111
JP\
s
C o n t r a s t
3 Contrast
Brightness
23 Size & Pos.
[D3 H. Position
S H.Size
0 V. Position
m V.Size
o Geometry
n V.Pincushion
.a
Side Pin. Bai.
Q Trapezoid
D Paraileiogram
o Rotation
Coior Temp
O
Recali
;© Video Level
?t Language
§!1 OSD Position
F\ Degauss
Signai
a
Contrast adjustm ent
C o n t r a s t
100
3 :[I]
Adjust the screen contrast to match the
brightness level in the room. Press the B key to
make the image lighter, the H key to make it
darker.Pressing the H] key toggles between
brightness and contrast.
Direct operation: Even if the menu screen does
not appear, the contrast can be adjusted by
pressing the 3 or B key.
If the H and B keys are pressed at the same
time on the Contrast adjustment screen, the
maximum level (100) will be set.
Contrast adjusts the white level.
^
Brightness adjustm ent
B ri g t n e s s
50
0 -.m
Adjust the brightness to match the brightness
level in the room. Press the 3 key to make the
background darker, the B key to make it lighter.
Pressing the H] key toggles between brightness
and contrast.
Brightness adjusts the black level.
* If the
3 and B keys are pressed at the same
time on the Brightness adjustment screen, the
standard level (50) will be set.
-
1 0
-