Panasonic PV-4664 - Manual (Page 20)

/(<1. V >\ Tape Operation(continued)
(
3
)
vtrv coiMTtA
^ IV WIAT t^to Q) o o o
<5 © O @
0 0
rg
o‘"cr
O © © Oj
© © 0 0'
© ® © Q
© © ©" ©
Shuttle Variable Speed Search
The SHUTTLE Ring allows you to smoothly control the tape speed during
special effects playback in both forward or reverse.
Turn SHUTTLE Ring on the VCR or
remote while in Play or Still mode to
place the VCR in Shuttle mode and
Start a forward or reverse search.
• The Shuttle indicator lights.
• The more you turn the Ring, the faster the search
speed will be.
Push a function button such as: PLAY, STOP, etc.
on the VCR or remote to release the Shuttle mode.
• The VCR performs the function of the button pushed.
• The Shuttle indicator goes out.
When the SHUTTLE Ring is turned more than half way
in Stop mode, normal Fast Forward or Rewind will begin.
Some noise bars are normal during Shuttle operation.
After 3 minutes in Still or Slow, the VCR will go into Stop
mode.
When the SHUTTLE Ring is released, the VCR goes into
Still mode.
Auto Operation Functions
Auto Playback
When a tape is inserted, the power comes on (Auto). If the record
tab* is removed, playback begins (Auto).
Auto Rewind
After a tape reaches its end during playback, fast forward or manual
record, the VCR will rewind and go into Stop mode.
Playback Auto Eject
After a tape without a record tab* is played to its end, the VCR will
rewind and then eject the tape.
Memory Rewind Off
When the POWER button is pushed during rewind, the VCR will turn
off after rewind is complete.
Eject Cassette
A cassette may be ejected with power on or off.
* For record tab information, see page 5.
20