Caution, Mracmkem»ssemb\^,lo(àb Page 7
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
s
mrACmKEm»SSEMB\^,lo(àB
A
CAUTION
DO NOT get the power cord caught under the noizle when using the vacuum or
attachments as it can be damaged by the agitator as it revolves,
ATTACHMEHTTS
a
Suction Control Slide ~
Telescoping
Wand
Dusting
Brush —
'Zi
UfOiolatery Tool
Q
Ra/S0d
Crevice
Tool
Wand
V
Tab
Hose
Crevice
The attachments should be conveniently positioned on the back and side
of the cleaner for easy access. Some of the attachments may already be
assemt^ed. Assemble the hose and attachments to the cleaner as fol
lows:
Insert the crevice tool, cleaning end down, into the end of the telescop
ing wand nearest the locking ring. A slight twist of the crevice tool wilt
lock it into place.
Place the telescoping wand on the back of the cleaner
with the locking ring and the crevice tool up, and
the bottom resting on the ledge near the wheel.
The hose ring should be inserted into the slot to hold
in place only when vacuuming areas below the upper
cord hook.
To attach the wand to the hose for use, align the two
(2) raised tabs on the wand with the “J" slots In the
hose. After guiding the tabs along the grooves,
twist to lock in place.
Nozzle
Telescoping
h
Wand
Upholstery
Tool
—
Agitator (Underneath)
-
7
-