Changingthe dust, Vw-s- ■. .ixls ^ v – Panasonic MC-V7347 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CHANGINGTHE DUST

■vw-s- ■. .ixls

V <

Always operate the vacuum with a genuine Panasonic Type U3 Standard, or U6

Electrostatic dust bag installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer.

1. Pull outward on

the dust cover grip,

located on the top of
the dust cover and

remove the cover.

2. To remove the dust

bag, grasp the cardboard

portion of the dust bag
and pull it out.

3. Spread out the end

of the new dust bag.

NOTE:

Pull carefully so

as not to tear the bag at
the folds.

□ o

Fold the new dust bag to

clear the slots as shown in
illustration. Failure to do
so will prevent the dust
cover from closing

properly. Attach the
new dust bag onto

the bag holder by

holding the card
board portion and

pushing back as
illustrated.

5. Reinsert the tab pro
vided on the end of the

dust cover into the
grooves on the dust com
partment to allow the
cover to rotate closed.

NOTE: The dust
cover must be com
pletely and cor

rectly installed for

proper opera
tion.

6. Rotate the dust cover up

into the closed position and
press into place.

NOTE:

The dust bag

should not be

caught

between

the lower edge

of the dust
cover and the

gasket as indicated

by the arrow in the
illustration.