Panasonic MC-V7347 - Manual (Page 6)

TO ASSEMBLE CLEANER
A
WARNING
Electrical Shock Hazard.
DO NOT plug Into electrical supply until assembly Is complete. Failure to do so
could result In electrical shock or injury.
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has
been installed for shipping
purposes. Please remove the
screw before inserting the
handle. Insert the handle
as shown in the illustra­
tion.
Make sure the
ON/OFF switch is In
the OFF position
before Installing.
Handle
2. Insert the screw
that you have
removed. Be sure
the screw is tight­
ened, but not
overtightened.
Do Not Remove
This Screw
Handle
Screw
3. There are two (2) recessed areas J
located on the back of the vacuum, as
shown in the illustration,
designed to secure the power power
cord during vacuuming. Cord
Always push the power cord down
into these recessed areas to help
keep the power cord from hanging
near the nozzle and being dam- ^
aged by the agitator. ^
4. Loosely wrap the power cord
around the quick release cord
hook and the lower cord retain­
er. Secure the plug head to
the cord by pushing the power
cord into the retainer on the
plug head.
Retainer
(Plug
Head
)—►
ÙSINGI^Ép^^l^K
1. The upper cord hook has a ,
quick-release action. To /
release the power cord, rotate jL
the hook downward and the /
complete power cord will drop IJ
off the hook for Immediate yM
use.
. Cord
Hoofr
2* DO NOT unplug the power Ky
cord by pulling on the cord. S 1
Grasp the plug head and pull to ftj
unplug the vacuum cleaner. ^1
Return the hook to the upright
position before attempting to
rewind the cord.
-
6
-