Panasonic SL-PD1348 - Manual (Page 5)

ICmneiMam
Please check and identify the supplied acces­
sories.
Before connecting the changer to your audio system, make sure
that the power of the changer and all other system components
are turned off.
©Although the figure below shows the AC power supply cord
being connected to a household AC outlet, if the amplifier (or
cassette deck) of Technics Midi-system is equipped with an AC
outlet, connect the cord to that outlet.
To operate with the remote control, connect the
remote control cable (included) to the REMOTE
OUT terminal of Technics tuner.
The operations such as play, stop, skip etc. can be
operated by remote control included with Technics Midi-
system. For details, refer to the operating instructions of
the system to be used.
Be careful of the following points when using this unit in
combination with a Technics tuner {ST-X902LA, ST-X302LA).
•Presetting the volume when the timer Is set (Refer to the
operating Instructions of Technics Midl-system for de­
tails.)
The volume cannot be preset, so set the volume level first
then switch the power to STANDBY.
•Switching over to another program source while a pro­
gram is being played on this unit.
This unit will not stop, so stop play before switching over to
another program source.