Panasonic SL-PD1348 - Manual (Page 14)

.!%,!:V^.r<' 'Vi, r^, .v,',"',’: f ’ ;:
! ■ vi;- ' v";- V'. '
IKIli
CAUTION
Before moving the changer to another location, be sure to carry out
the "Preparations for moving the unit" described below.
Failure to do so wilt expose the compact discs and the changer to the
risk of severe damage.
Preparations for moving the unit
All of the discs must be removed so that the trays are completely
empty.
Use the following procedure.
0 Press POWER to switch off the unit.
0 Press POWER to switch on the unit.
(If there is a disc in the play section, it will be returned to the disc
tray at this time.)
0 Press ^ OPEN/CLOSE to open the loading
drawer.
0 Press DISC SKIP to rotate the disc trays and
remove the discs from all disc trays.
0 Press ^ OPEN/CLOSE to close the loading
drawer.
0 Press POWER to switch off the unit.
If you have pressed a wrong button by mistake, return to step (J).
POWER DISC SKIP
■ AUDIO
No. of channels
Frequency response
Output voltage
Dynamic range
S/N
Total harmonic distortion
Wow and flutter
DA converter
Output Impedance
Load impedance
■ PICKUP
Wavelength
■ GENERAL
Power consumption
Power supply
Dimensions (WXHXD)
Weight
Note:
Specifications are subject to change without notice.
Weight and dimensions are approximate.
2 (left and right, stereo)
2-20,000 Hz, ±1 dB
2 V (at 0 dB)
92 dB
100 dB
0.007% (1 kHz, 0 dB)
Below measurable limit
MASH (1 bit)
Approx. 1 kQ
More than 10 kQ
780 nm
12 W
AC 50/60 Hz, 230-240 V
360X125X 370 mm
4.1 kg
MASH is a trademark of NTT.
^OPEN/CLOSE