Panasonic 5.8 GHZ EXPANDABLE DIGITAL CORDLESS ANSWERING SYSTEM KX-TG6074 - Manual (Page 39)

Multi-unit Operation
To establish a conference call;
Press [Conf],
• To leave the conference, press
[OFF] The other parties can
continue the conversation.
• To put the outside call on hold,
press [HOLD], To resume the
conference, press [Conf],
Base unit
1
During an outside cali, press
[LOCATOR/INTERCOM] to put the
call on hold.
2 To page a specific handset, enter its
extension number ([1]-[4]}.
To page all handsets, press [0] or
wait for a few seconds.
3
Wait for the paged party to answer.
• if the paged party does not answer,
press [LOCATOR/INTERCOM] to
return to the outside call.
4 To complete the transfer;
Press [SP-PHONE].
• The outside call is being routed to
the handset.
To establish a conference call;
Press [CONF].
• To leave the conference, press
[SP-PHONE]. The other parties
can continue the conversation.
• To put the outside call on hold,
press [HOLD]. To resume the
conference, press [CONF].
Answering transferred calls
Handset
Press [-N] to answer the page.
Base unit
Press [SP-PHONE] to answer the
page.
Note for handset and base unit;
• After the paging party disconnects,
you can talk to the outside caller.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
[MENU] ^ [0][0][1]
2 Base unit:
Press and hold [LOCATOR/
INTERCOM] until the IN USE
indicator flashes.
• After the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3
Handset;
Press [OK], then wait until a beep
sounds.
4 [OFF]
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.
Deregistering a handset
1 [MENU] ^ [0][0][2]
2 [3][3][5] ^ [OK]
3 Select the handset you want to
cancel by pressing the desired
handset number ([1]-[4]).
For assistance, please visit http://www.panasonic.com/heli