Making calls, Using the handset, Note – Panasonic 5.8 GHZ EXPANDABLE DIGITAL CORDLESS ANSWERING SYSTEM KX-TG6074 User Manual
Page 15: Using the speakerphone, Adjusting the receiver/speaker volume, Making a call using the redial list, 1 [redial, Erasing a number in the redial list, 3 [erase] —> [yes] —> [off, Pause button (for pbx/long distance service users)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making/Answering Calls
Making calls
Using the handset
1 Dial the phone number.
• To correct a digit, press [Clear].
2
Press
[*M
or [Cal!].
3
When you finish talking, press [OFF]
or piace the handset on the base unit
or charger.
Note;
•
“Line in use”
is displayed when
someone is taiking on the unit or
another phone.
Using the speakerphone
1 Dial the phone number, and press
[<-].
• Speak alternately with the other
party.
2
When you finish talking, press
[OFF]
Note:
• Use the speakerphone in a quiet
environment.
• To switch to the receiver, press [*>].
Adjusting the receiver/speaker
volume
Press [A] or [
t
] repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the rediai list (each 48 digits
max.).
1 [REDIAL]
2 [T]/[i]: Select the desired phone
number.
3 [->]
Erasing a number in the redial list
1
[REDIAL]
2
[T]/[i]:
Select the desired phone
number.
3
[Erase] —> [Yes] —
>
[OFF]
PAUSE button (for PBX/long
distance service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
Phonebook, a pause is also needed
(page 21).
For example, if you need to dial the line
access number “9" when making
outside calls with a PBX:
1 [9] —>
[PAUSE]
—>
Dial the
phone number.
2 [*N]
Note:
• A 3.5 second pause is inserted each
time [PAUSE] is pressed. Press
repeatedly to insert longer pauses.