Troubleshooting, Problem remedy – Panasonic KX-E2000 User Manual

Page 56

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING

PROBLEM

REMEDY

I. Character spacing is erratic.

• Make sure the "Pitch Selector” agrees with

the pitch indicated on the daisywheel.

2. Character printout is not clear.

• Make sure the ribbon is good.
• Make sure the "Pitch Selector” and “Impact

Control Selector” are set correctly.

3. Characters cannot be printed.

• Make sure the daisywheel is mounted cor

rectly on the printer.

• Change the ribbon cartridge.

4. Characters cannot be cancelled.

• Make sure the correction tape matches the

type of ribbon cartridge being used.

• Make sure the correction tape is installed

correctly.

• Change the correction tape.

5. Character printout is scrambled.

• The p r i n t w h e e l i s m i s a l i g n e d . Press

CODE+T twice to reset the typewriter.

If the problem persists after performing all of the above checks, call for service.