Changing the daisywheel – Panasonic KX-E2000 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the Daisywheel
1
Lift out the ribbon cartridge
2
Pull the green lever that is located to the right of the printhead
towards you. Grasp the clear plastic cartridge and lift the
daisywheel out of the machine.
Place the plastic cartridge of another daisywheel in the carrier
with the characters facing the platen. Push the right side of plastic
cartridge down into the carrier and push the green lever back into
position.
4
Replace ribbon
5
Close top cover
44