Panasonic AG-5210 - Manual (Page 9)

Still Playback After Finishing Playback
Press the PAUSE/STILL Button during normal playback or
during slow motion playback. Still playback will only return
to normal playback mode by pressing the PAUSE/STILL
Button once again.
• If noise appears during still playback, set for slow motion
mode and adjust with the Tracking Control Buttons to
minimize the bands of noise as shown below, then press
the PAUSE/STILL Button.
TRACKING
-DO
.. ....ULLLiUJliLito
• If still playback continues for more than 5 minutes, the
VTR will go into the stop mode automatically.
• A distortion may occur on the picture during still mode,
but this is not a malfunction.
• No sound is heard during still mode.
• Color program may be played back in black and white
or playback image may be dark during still mode, but
this is not a malfunction.
Press the Stop Button to stop the playback.
For playback of tapes recorded in SP mode, exchange­
ability is guaranteed by the VMS standard, but a stable
playback picture may not be obtained for tapes recorded
in LP or SLP mode.
Vertical Lock Adjustment
If picture jitters vertically in STILL, adjust the V-Lock
Controls on the rear panel, but a one time adjustment
should be necessary.
If the TV Monitor has a vertical hold control, adjust this
together with the V-Lock Controls.
V-LOCK
2h(SP) 6tv{SLP)
4h(lP)
- 9 -