Press [sleep] to select the desired time, Using an external unit el – Panasonic SC-AK27 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SLEEP
□
a
Headphones
{not included)
I
Using the timer
QíMí© djü3 dÍ3S[j) i&na?
□
This timer turns your system OFF at the set time (Max. 2 hours,
settable at 30-minute interval). It lets you fall asleep listening to music.
by remote control only
Preparation
Switch on the power.
The figure shows how to set the system to standby mode after 30
minutes.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
30
60 — 90 —120 — OFF
C
J
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select “OFP.
To confirm the remaining time:
{only while power is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
The sleep timer turns OFF automatically the moment you attempt
to edit-record a CD using CD Manager function.
The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
Using an external unit El
Ustening to an external source
{See page 7 for external unit connection)
1. Press [AUX].
The power will come on automatically.
2. Start playback from the external source. {For details, refer to the
owner^s manual of the equipment.)
Recording from an external source
8
c
2!
I
0)
I
1. Follow steps D-B on page 21.
2. Press [AUX].
3. Press [• REC/STOP] (recording starts).
4. Start playback from the external source. (For details, refer to the
owner's manual of the equipment.)
Ustening with headphones Q
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm (1/8") stereo
rna
Avoid listening for prolonged periods of time to prevent hearing damage.