Panasonic SC-AK27 - Manual (Page 26)

I
s
1
2
0)
cc
"D
§
s
0
3
D"
TJ
c
3
Si
Vaiyin^ the sound quality
acoustic image (Al) equafb
with the
izer Q
The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
quality coordinates to achieve subtle sound quality settings with ease.
□ Dial [SOUND EQ] to display “Al EQ”.
When it is turned clockwise, the settings are selected in the
following sequence.
© H E A V Y ^
@ CLEAR
©SOFT
© DISCO
® LIVE
® HALL
@ MANUAL
® Al EQ
® FLAT -
The SOUND EQ lamp tights more brightly, and “FLAT is cleared.
Operate [SOUND EQ] jogcap and set the sound
quality as desired.
© i- direction: SOFT-SHARP setting
@ i T direction: LIGHT-HEAVY setting
Repeat steps © and ® to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display “FLAT".
• The sound quality setting is stored automatically. It Is recalled
when “Al EQ” is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
Selecting the 3D acoustic image (3D
Al) equalizer
El_________________
Press [3D Ai EQ].
Every time you press the button:
3D Al 1
i
3D AI2
J
Al EQ {Light off)
• If the equalizer is not set at Al mode, it will be switched to Al mode
once [3D Al EQ] is pressed.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.