Ru press [cd, Press [cd manager] to select the desired mode, Press or [^^/^m] to select the desired – Panasonic SC-AK27 User Manual
Page 23: Track, Press [• rec/stop] to start recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

0
Frontside II
1
II 2 II 3 II 4 II 5
h
Reverseside ||9|| 8 || 7 || 6 || |5
IK
The interrupted track is re-recorded in its entireh
reverse side.
/ on the
Recording from compact discs
To record special CDs and tracks
(CD Manager function)
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
• While recording, if a track is cut off in the middle at the end of the front
side, it is re-recorded from the beginning, on the reverse side. Q
• At the end of the reverse side recording stops and the current track
will be interrupted.
Before recording
Prepare the tape you want to use. Perfomi steps
D
through
Q
on
page 22.
ru Press [CD].
Press [CD MANAGER] to select the desired mode.
Every time you press the button:
1-TRACK-^ 1-DISC-*- 1-ALL
- NORMAL ----- ------- 1
(OFF)
1-TRACK:
Only one particular track is recorded.
1-DISC:
The tracks on only one particular disc are recorded.
1-ALL:
The same track numbers on each of the CDs are
recorded in succession.
(NORMAL: The original display is restored in about 3 seconds.)
Press [DISC 1] - [DISC 5] to select the disc you
want.
PBTBi
This step is not required if 1-ALL was selected in step Q.
Press
or [^^/^M] to select the desired
track.
This step is not required if 1-DISC was selected in step Q.
Press [• REC/STOP] to start recording.
To stop recording
• To add a 4 second silent interval before stopping
Press
P).
The CD will automatically stop too.
• To stop recording without a silent interval
Press [• REC/STOP], The CD will stop automatically too.
«)
C
E
I
o>
c
1