Tape playback, Single tape playback, Automatic playback relay (deck 2 to deck 1 ) – Panasonic RX-DT670 User Manual
Page 17: Full auto-stop, Fast forward and rewind, Cue and review
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE PLAYBACK
This unit has a dual cassette system, which means that a
tape can be played back with both deck 1 and deck 2.
Use nomnal type of cassette tape only.
■ Single tape playback
1. Open the cassette compartment cover by pressing the
stop/eject button. Insert the tape, and then close the
cassette compartment cover.
Note:
Make sure the exposed part of the cassette tape
is face down. If it is upside down, the cassette
compartment cannot be ciosed. Do not try to force
it shut.
2. Press the operation switch to turn on the unit.
3. Press "TAPE” button of the function select buttons.
Tape display will appear on the display.
4. Press the playback button to begin the playback.
5. Adjust the volume and balance.
6. Adjust the graphic equalizer and S-XBS level controls to
desired setting.
Note:
If you press deck 1 and deck 2 playback buttons
simultaneously, deck 2 has priority. Consequent
ly, when playing back deck 1, check that the deck
2 playback button is not pressed.
■ Automatic playback relay (deck 2 to deck 1 )
When deck 2 playback has finished, deck 1 playback starts
automatically.
1. Insert the playback tapes into deck 1 and deck 2.
2. Press the deck 2 playback button.
3. Press the deck 1 pause button, then press the deck 1
playback button.
■ Full auto-stop
During playback, recording, fast forward or rewind when the
tape reaches its end, the automatic stop system will release
the operation buttons.
■ Fast forward and rewind
The tape will move rapidly fonvard when the fast for-
ward/cue button is pressed.
The tape will rewind rapidly when the rewind/review button
is pressed.
Note:
Do not press the playback button during fast forward
or rewind, as this may jam the tape. Always press the
stop/eject button first, between functions.
■ Cue and review
If the fast forward/cue button (or rewind/review button) is
pressed during playback, the recorded sound on the tape
can be monitored at a fast speed.
When the button is released, playback will resume.
•To stop the playback
Press the stop/eject button.
•To Stop the playback temporarily
Press the pause button.
To resume tape playback, press the pause button again.
17