Panasonic RQ-V200 - Manual (Page 12)

■ Antennas
FM:
The earphones cord serves as the FM antenna,
so be sure to have it extended, not coiled.
AM:
The built-in ferrite core AM antenna is directional.
It may be necessary to turn the unit to obtain
optimum reception.
Be sure to have the set in a horizontal position
when you listen to AM broadcasts. If you use the
radio in an upright position, it may not function
adequately.
■ Last station recall
This memory functions when the radio is turned
off. The frequency last tuned into is automatically
received when the radio is turned back on again.
■ How to store the broadcasting
stations
Since this unit features a dual mode function
(MODE1, MODE2), the setting for each mode can
be stored in and erased from the memory sepa­
rately.
This feature proves to be convenient when travel­
ing.
To store radio stations into buttons 1,2 and 3
(for direct tuning)
3- FM and 3-AM stations can be stored in each
mode.
1. Press the band/mode select button for
about 3 seconds to select the mode
(MODE1,MODE2).
2. Tune in the station to be stored.
3. Press the memory button.
The memory indicator will flash on and off for
10 seconds.
4. During flashing, press one of the 1, 2 or
3 buttons.
(Three beeps will be emitted.)
The direct tuning indicator and memory chan­
nel number will appear, and the memory indi­
cator will light.
To store radio stations Into memory channels
from 1 to 4
4- FM and 4-AM stations can be stored in each
mode.
1. Press the band/mode select button for
2 seconds to select the mode (MODE1,
MODE2).
12