Panasonic RQ-V200 - Manual (Page 10)

■ Manual reverse
Select the playback side, forward or reverse, by
pressing the direction selector to "FWD” or
“REV”.
■ Tape selector
Set the selector to the appropriate position ac­
cording to the type of tape being used.
CrOz I MTL[: Metal tape/high bias chromium tape
or equivalent
NOR: Low bias ferric oxide tape
■ Cassette tapes ( [^)
Cassette tapes, both recorded and unrecorded,
should not be stored in locations with high temper­
ature, high humidity or direct sunlight. Never place
a recorded cassette near a magnetic source such
as a magnet or a TV set as this may affect tape
performance.
■ Cassette tapes exceeding 90 minutes
These tapes are handy for their long playback and
recording time but be careful about repeatedly
stopping and starting, rewinding and fast for­
warding these tapes in short intervals as they are
thin, tend to stretch and may become entangled in
the machine.
■ *Dolby NR switch
(Only for RQ-V200)
This unit includes Dolby noise reduction which
reduces the noise.
ON: To playback the tape recorded with Dolby
B-type noise reduction
OFF: For other tapes
*Dolby noise reduction manufactured under li­
cense from Dolby Laboratories Licensing Cor­
poration.
“DOLBY” and the double-D symbol HI are trade­
marks of Dolby Laboratories Licensing Corpo­
ration.
SPECIAL FEATURES
■ XBS switch
XBS boosts the low frequency range, so that you
can fully enjoy the dynamic low sounds.
10