Canon A430 - Manual (Page 45)

43
Sh
oot
in
g
z The default Color Accent is green.
z You may not obtain the expected results after color input
mode if you use the flash.
z The specified Color Accent is retained even if the camera's
power is turned off.
Shooting with Color Swap Mode
2
Press the DISP. button.
zThe camera will switch to color
input mode, and the display will
alternate between the original
image and the color accent image
(using the previously set color).
3
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor and press the
W button.
zOnly one color can be specified.
zYou can use the S or T button to specify the range of the
colors that are retained.
-5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to retain.
4
Press the DISP. button.
zThis completes the setting.
Original Color
(Before Swapping) Desired Color
(After Swapping)