Using the drive, Installing/removing a device, Preparations – Panasonic CF-VDR721 User Manual
Page 6: Using the ôrtve
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Drive
Installing/Removing a Device
Refer to the Reference Manual included with your computer on how to install/remove the
drive.
Be sure to turn the computer off before installing/removing the drive.
Preparations
tWinbowsl98l
Contlrm the following contents in [Start] - [Settings] - [Control Panel] - [System] - [Device
Managcrl - [CDROM] - [MATSHITA UJDA*** DVD/CDRW] - [Settings], Make the set
tings if they have not yet been made.
• Add a check mark for [DMA].
• Set both [Start drive letter] and [End drive letter] in [Reserved drive letters] to [L:].
(Wii^ows}2000l
Confirm that [Transfer Mode] is set to [DMA if available) in [Control Panel) - [System] -
[Hardware] - [Device Manager] - [IDE ATA/ATAPI controllers] - [Secondary IDE Chan
nel] - [Advanced Settings] - [Device 0). Perform this setting if it has not yet been made.