Panasonic NV-HD70EA - Manual (Page 7)

Setting the Clock of the VTR
§
O)
.C
Oi
CO
1,3
In addition to setting the VTR clock from the remote
controller, it can also be set directly from the VTR.
The built-in clock is used to activate the timer for automatic
recording and must be set to the correct time.
The built-in digital clock employs the 24-hour system.
Preparation
Turn on the VTR.
For Example:
Date; 16th, October, 1999
Time; 20:15
Operations Display Symbols
1
CLOCK SET
О
Keep CLOCK SET pressed for more than
2 seconds.
2 Set each item by pressing + or — and NEXT.
I
□
NEXT
Set Year “99”.
Set Month “10”.
Set Date “16”.
Set Hour “20”.
Set Minute “15”.
•There is no need to press NEXT.
CLOCK SET
О
Press CLOCK SET.
•The clock will start.
Time Reset Function
If the clock is less than two minutes slow or fast, it can
easily be reset to the proper time.
For example:
Resetting the clock to 12:00.00
1 Keep CLOCK SET pressed at any time between
11:58,00 and 12:01.59 for more than 2 seconds.
2 Press CLOCK SET again as soon as you hear the
12:00.00 time signal.
Note:
The clock operates for at least 60 minutes by its backup
system ;n the event of power failure.