Panasonic NV-HD70EA - Manual (Page 12)

Setting the Remote Controller for Operation of
your TV
You can operate some manufacturer of TVs {see table
below) using the supplied remote controller after this
setting up.
Number Manufacturer
1
2
Panasonic
3
4
5 GRUNDIG.^Blaupunkt
6 PHILIPS
7 SONY
Preparation
•Turn on the TV.
• Install the batteries in the remote controller. See page 13.
Operations Display Symbols
^ Open the door of the remote controller.
Keep CLOCK/PRESET pressed for
more than 2 seconds and then press it
twice.
о
CLOCK'PRESET
2,4 3
•‘TV’’ now appears on the remote controller’s
display.
Press OFF several times.
OFF
•When the number matches the manufacturer of
your TV, the TV's power is turned off.
Press CLOCK/PRESET.
О
CL0GK''PRESE7
C ON OFf
Close the door of the remote controller.
How to change the number
Each time the side of
OFF is pressed, the number is
counted up by one as follows:
r-1^2-.3...7----------,
When the side is pressed, the number is counted down
by one in the reverse order to that indicated above.
Note;
Some TV models cannot be operated using this remote
controller.
When the number is 1,2, 3 or 4:
When the TV’s power is turned off in step 3 above, turn it
back on and adjust the TV's volume using this remote
controller. The volume can be adjusted if the number
matches the manufacturer of TV.
if it is not possible to adjust the TV’s volume, try setting the
number (1 to 4) to match the manufacturer of TV again until
the volume can be adjusted.
¡2