Panasonic KXL-807A - Manual (Page 21)

Troubleshooting
Trouble Possible Cause Solution
The player or the
computer does not
function properly. ■When using power from a PC c
Computer’s battery is low.
Power cannot be supplied from
a PC card slot depending on
the performance of computer’s
power supply.
ard slot:
It is recommended to use
computer with AC power.
Set the MODE switch No. 2 to
ON (isi-p. 12,13). If the player
still does not function,
connect the optional AC
adaptor and set the MODE
switch No. 1 to ON.
■When using AC adaptor (option
The optional AC adaptor is not
connected into the outlet or DC
IN jack properly.
):
Connect the optional AC
adaptor properly (ca-p. 11).
The Auto Protect function of AC
adaptor is working.
Disconnect the optional AC
adaptor and connect it again
after 2-3 minutes.
The player
(especially disc
spindle), AC
adaptor (option) or
ATARI PC card is
warm.
This is not abnormal. If they
become abnormally hot,
consult your dealer.
Transmission
speed of data
slows down when
using AC adaptor
(option).
The CD is warped and the
player is in the VIBRATION
DETECTIVE mode.
Set the MODE switch No. 3
to OFF to deactivate the
VIBRATION DETECTIVE
mode (ra-p. 12,13).
However, if the CD is heavily
warped and has strong
vibration, the data may not be
read.
Sound skips, or
data can not be
CD is placed with the label side
facing down.
Place the CD with the label
side facing up (ca-P. 14).
read.
“ iiEl
[OJD^Ê i^3rk is used.
DtCrTAl. AUDIO
Use the CD marked with
rilnal 0^ til KP-4).
nCfTALAUOtO
CD or the lens of the player
may have become dirty. Clean the CD or the lens of
the player (>®’P. 23).
CD is damaged. Replace with another CD.
Dust such as a hair lay on the
disc spindle.
Clean the disc spindle.
O
c
2
(D
W
3"
o
o
5'
(Q
21