Preparation, Setup, Step 1 connection – Panasonic KXL-807A User Manual

Page 10: Disconnecting atapt pc card from interface cable, I step 2 setting up your computer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Preparation

Setup

Step 1 Connection

Connect the supplied ATARI PC card, interface cable and the player. For the
connection with the computer, refer to the enclosed Setup Manual.

Note:

• Use only the supplied ATARI PC card and interface cable with this player. Other

ones could damage the player or computer.

ATARI PC card

\Disconnecting ATAPt PC card from interface cable:

While pressing the side tabs of it (0)>

pull the interface cable straight (0),

Caution:

• Do not force the interface cable

since this could damage the ATARI

PC card or interface cable.

Step 2 Setting up your computer

To use the player with a computer, you must install a device driver using the supplied

Setup disk.

Please refer to the enclosed Setup Manual.