Panasonic PT 37P1 - Manual (Page 6)

Safety Precautions
CAUTION
This Wide Plasma Display is for use only with the following optional accessories. Use with any other type of
optional accessories may cause instability which could result in the possibility of injury.
• Manufactured
• Manufactured
• Manufactured
• Manufactured
• Manufactured
• Manufactured by Matsushita Electric Industrial Co., Ltd.
by Matsushita Electric Industrial Co., Ltd.
by Matsushita Electric Industrial Co., Ltd.
by Matsushita Electric Industrial Co., Ltd.
by Matsushita Electric Industrial Co., Ltd.
by Matsushita Electric Industrial Co., Ltd. Pedestal
Wall stand
Mobile stand
Wall-hanging bracket (vertical)
Wall-hanging bracket (angled)
Ceiling unit
TY-ST42PT1U
TY-ST42PW1U
TY-ST42PF1U
TY-WK42PV1U
TY-WK42PR1U
TY-CE42PS1U
Always be sure to ask a qualified technician to carry out set-up.
When using the Wide Plasma Display
Do not bring your hands, face or objects close to the ventilation holes of the Wide Plasma Display.
• Top of Wide Plasma Display is usually very hot due to high temperature exhaust air from ventilation holes. Bums or
personal injuries can happen if any body parts brought too close. Placing any object near the top of the display could
also result in heat damages to the object as well as to the Display due to its ventilation holes blocked.
Be sure to disconnect ali cables before moving the Wide Plasma Display.
• Moving the Display with its cables attached might damage the cables which in turn can cause fire or electric shock.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a soft, lint-
free cloth.
• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in water to which a small
amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the
surface is dry.
• Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with
volatile substances such as insect sprays, solvents and thinners, otherwise the quality of the surface may be
adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in waterto which a small amount of neutral detergent has been added
and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
• Do not allow any detergent to come into direct contact with the surface of the Wide Plasma Display. If water droplets
get inside the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it becoming dusty.
• Built-up dust on power cord plug can increase humidity which might damage the insulation and cause fire. Unplug
the cord from wall outlet and clean it with a dry cloth.
Note:
If still pictures from sources such as video games or computers are projected for tong periods, the image may become
burned into the Wide Plasma Display panel (producing an “afterimage”).