Optional equipment connections, Vcr connection, Viewing a video – Panasonic PT 51SX60 User Manual
Page 6: Procedure, Recording a television program procedure
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/NSTALLATION
Optional Equipment Connections
VCR Connection
Follow this diagram when connecting your television to a VCR only. The S-VIDEO connection
provides higher quality picture. It overrides other VIDEO connections. Use INPUT 1 or 2, AUDIO R
and L with S-VIDEO connection.
VCR
S-VIDEO OLTT
^ •-
AUDIO OUT
# R
ANTOUTPin' I
IcTFlJ«
I-
CABLES NOT SUPPLIED jj^ ^
^
TERMINALS ON BACK OF TV
CENTER CHANNEL INPUT
120 SOW (DIN) MAX
@
@ I
VIDEO 5-VIDE'
Use
either
the
S-Video or Video
connection.
i
INPUT 2
TO AUDIO AMP
PROG.
OUT
Incoming Cable
Wore; The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Viewing a television program
Procedure
1. Select ANTI in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
□
Option A
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2.
Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3.
Begin the video,
a Option B
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
O Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4.
Begin recording.
□
Option B (Recording one program while viewing another program)
1. Select ANT 1 in the SET UP menu under Prog Chan (Program Channels).
Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
Using the VCR, tune to the television program you want to record.
Begin recording.
Press the TV/ViDEO button on the remote control to switch back to TV mode.
Tune the television to the television program you want to view.
2.
3.
4.
5.
6
.
<9