Yamaha PSR-400 - Manual (Page 37)

FEATURE REFERENCE
(MIDI)
• Transmitted Data
The following data is transmitted via the MIDI OUT
connector when either the Remote Control or Multi Voice
mode is selected:
• The transmit channel for each voice is set using the
MIDI CHANNEL button described on page 24.
• All notes played on the keyboard, including velocity data.
In the SPLIT mode the left- and right-hand voices are
transmitted on their respective transmit channels.
• In the FINGERED or SINGLE FINGER mode, only data
corresponding to notes played on the right-hand section
of the keyboard is transmitted.
• Transmitted note numbers are affected by the Trans­
pose setting.
— • Transmitted note numbers are affected by the octave
setting.
• Program change and control change data will not be
transmitted if the DUAL function is engaged. Turn DUAL
off if you want this data to be transmitted.
• Pitch bend data. The actual pitch bend data range is
determined by the pitch bend range setting. If the pitch
bend range is set to 12, for example, data from ООН ООН
to 7FH 7FH will be transmitted. If the pitch bend range is
set to 1, data from 3CH 3AH to 20H 45H will be transmit­
ted.
• The MIDI program change number corresponding to the
number of the selected voice is transmitted when a voice
is selected.
• MIDI control change messages corresponding to reverb
(PSR-500 only), pan, volume, and sustain are transmitted
when these functions are operated. For details refer to *
below.
• A MIDI START message is transmitted whenever the
rhythm or accompaniment is started, and a MIDI STOP
^ message is transmitted whenever the rhythm or accom­
paniment is stopped. The same applies to demo and
song memory start/stop operations.
• Style, custom style, demo, multi pad (PSR-500), drum
pad (PSR-400), notes added by the auto harmony func­
tion, and song memory playback are not transmitted.
• When a VOICE MEMORY button is pressed, the program
change and control change data corresponding to that
voice is transmitted. The previous panel data is
transmitted when a VOICE MEMORY is turned off.
Control Change Data Value Specifica­
tions
(receive and transmit, both modes)
Data Format: BnH -> cc -> vv
BnH: Control Event (n=channel number)
cc : Control Number
w : Control Value
vibrato cc=0lH
vv= ООН
ЮН
20H
ЗОН
40H
50H
бон
70 Н
0FH : о (off)
- 1FH ; 1 (min)
- 2FH ;2
-3FH : 3
-4FH;4
- 5FH ; 5
- 6FH : 6
- 7FH : 7 (max)
Each voice has its own default value that is used when the
voice is initially selected.
cc=:07H ; volume
24 (Panel Value ; max)
01 (-24dB)
00 (no sound) vv= 7FH
01H
ООН
The default value when no data is being transmitted is 6F
(panel value; 21).
cc=0AH ; pan
vv= ООН
08H
ЮН
18H
20H
28H
ЗОН
38H
48H
50 Н
58Н
бон
68Н
70Н
78Н
The default value is “center" when no data is being trans­
mitted.
cc=40H : sustain
vv= ООН - 3FH : off
40H - 7FH : on
Default is off.
-07H :-7 (Left Most)
- OFH ; -6
- 17H :-5
- 1FH : -4
- 27H : -3
- 2FH : -2
- 37H : -1
- 47H : 0 (Center)
-4FH : 1
-57H ; 2
-5FH:3
- 67H : 4
- 6FH : 5
-77H :6
- 7FH : 7 (Right Most)
:5BH : reverb i(PSH1-500 only)
vv= ООН - 07Н : 0 (Off)
08H - OFH : 1
ЮН - 17Н ; 2
18H - 1FH : 3
20H - 27Н : 4
28H - 2FH: 5
ЗОН - 37Н : 6 (Default)
38H - 3FH: 7
40H - 47Н : 8
48H - 4FH: 9
50H - 57Н : 10
58H - 5FH; 11
бон - 67 Н: 12
68Н - 6FH: 13
70Н - 77Н : 14
78Н - 7FH ; 15 (max)
cc=7BH : all note off
vv= ООН (fixed)
35