Yamaha MC1203 - Manual (Page 11)

SPECIFICATIONS
Ge'neral Specifications
Frequency Response 20Hz — 20kHz +1/-3dB @600 Q , +4dB
Total Harmonic Distortion < 0.1% 20Hz — 20kHz @600 Q,, +4dB
Hum and Noise*^
ST OUT, Mix OUT, AUX SEND -128dB Equivalent input noise
STOUT, Mix OUT -96dB Residual output noise
ST OUT -88dB Master fader at nominal
All channel ON switches off
-64dB Master fader at nominal
One channel fader at nominal
AUX SEND -78dB AUX SEND control at nominal
All channel ON switches off
-64dB AUX SEND control at nominal
One channel AUX control at nominal
Maximum voitage gain 84dB CH INPUT ^ ST OUT, MIX OUT
76dB CH INPUTS AUX SEND 1
86dB CH INPUTS AUX SEND 2, 3
16dB AUX RTN ST OUT
lOdB SUB IN ^ ST OUT
6dB SUB IN ^ AUX SEND
66dB TALKBACK ^ ST OUT
Crosstaik @ 1kHz -70dB adjacent input channels
-70dB input to output, PAN
input channei equaiization ±15dB maximum cut or boost in each of three bands
HIGH lOkHz*^ shelving
MID 350Hz to 5kHz peaking
LOW lOOHz*^ shelving
VU meters (0VU=+4dB or
1.23Vrms output ievei)
4 illuminated meters (#1 - AUX 1,2, 3; switchable, #2 and #3 - STEREO L
and R, #4 - MIX/CUE; switchable). Peak LED on each meter turns on
when signal level reaches +14dB level.
PEAK indicators Red LED on each channel, turn on when post-EQ signal reaches 3dB
below clip level
Phantom power +48VDC supplied via 6.8kQ current limiting/isolation resistors to balanced
inputs for powering condenser microphones
10