Cassette tape, Maintenance, Cassette tape others – Panasonic KX-T2386BA User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cassette Tape
Others
•For optimum sound quality and
performance, we recommend you to
use side 2 after six months and to
repiace the tape every year and to
re-record the outgoing message
every three months supposing that the
unit answers about ten calls a day.
•Never place a cassette tape near a
magnetic source, such as a magnet or a
TV set, because it may erase the tape.
• insert the cassette tape into the
machine with the tape in front of the
capstan as shown below.
•Slack in the tape can be tightened by
rotating the tape reel with a pencil, as
shown:
• If there is any trouble, disconnect the
unit from the telephone line and connect
a known working phone. If the known
working phone operates properly,
return your unit to your supplier for
repair. If the known working phone does
not operate properly, consult with a
telephone company.
• Do not use benzine, thinner, or similar
solvents. Do not use abrasive powder to
clean the cabinet. Wipe it with a soft
cloth.
• Keep the unit away from heating
appliances and electrical noise
generating devices such as fluorescent
lamps, motors and television. These
noise sources can interfere with the
performance of the EASA-PHONE.
•This unit and the cassette tapes should
be kept free of dust, moisture, high
temperature and vibration, and should
not be exposed to direct sunlight.
• Never attempt to insert wires, pins, etc.
into the vents or other holes of this unit.
Maintenance
Because the head and capstan
assemblies are in contact with the tape,
dirt and residue from the tape can easily
adhere to these parts, causing distortion.
These parts should be cleaned
periodically in the manner described
below.
•Clean the head surfaces, pinch roller
and capstan with a cotton swab.
If these surfaces are extremely dirty,
dampen the cotton swab with alcohol.
Notes:
•Do not bring magnetic or metal objects,
such as a screwdriver, near the head
assemblies, as such objects could
magnetize the heads.
• Do not oil any part of the unit.
Heads
Pinch roller
J
-18-