After returning home, To listen to messages, To save messages after playback – Panasonic KX-T2386BA User Manual
Page 12: And i, 1 push the playback/pause button, Listening to the icm after reset, Push the playback/pause button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/652727/12/background.png)
After Returning Home
TO LISTEN TO MESSAGES
-11
Push
•To
Stop the tape temporarily (pause),
TO SAVE MESSAGES AFTER
PLAYBACK
Push
-
1
!
REW
and i
(simultaneously)
^/11
Push
•To rewind the tape,
REW
Push
To Listen to Messages
1
Push the Playback/Pause Button.
Auto-Logic
(One Touch Operation)
•One touch on the playback button
allows the unit to play back and
sound 3 beeps after the last
message. Then 10 seconds later,
the unit will rewind and be ready
to record new messages from
the beginning of the ICM part of
the tape (Reset mode).
•While in the pause mode, the unit
will not automatically change to the
answer mode. To change to the
answer mode, push the Pause Button.
• If you receive a call while playing
back, push the Pause Button then
lift the handset.
•To listen to the message again
during playback, push the Rewind
Button. The unit will start playing
back immediately when you
release the button.
>To record new messages from
the beginning of the ICM part of
the tape during playback, push
the Rewind Button until the In
Use indicator goes out.
To Save Messages
The previously recorded messages may
be saved.
1
Play back the tape until you hear
the message that you want to
save.
2
Push the Playback/Pause Button
and the Rewind button
simultaneously.
•The unit will rewind the tape after
2 seconds and will be ready to
answer and record future incoming
messages after the message that
you have saved.
-Listening to the ICM after Reset—
1. Push the playback button.
•You hear the 3 beeps.
2. Push the playback button again.
1 1 -